CEN Racing 2024 M-Sport Puma Rally 1 RTR with Brushless Motor, Sensorless Water-Proof ESC - Remote Control Car, RC Racing Car, RC Rally 1/8 Scale On Road Full 4WD Without Battery for Adults

9000 2024 M-SPORT Puma Rally 1 - 1/8 4WD RTR Brushless Motor 2024 M-SPORT PUMA RALLY1. 1/8 RTR 4WD **Battery and charger are not included** **Recommend 2S - 3S Lipo Battery** Item 9000 *** Features: * ESC: - 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HBW). - 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries. - Water-Proof and Dust-Proof for All Weather. - Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo. - Built-In Capacitor Module. - Automatic Throttle Range Calibration. - Low Voltage Cut-Off Protection for Li-Po and NiMH Battery. - Over-Heat Protection and Throttle Signal Loss Protection. - 5 Levels of acceleration/punch. - 9 Levels of maximum brake force. * Motor: - CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless). * Servo: - 12Kg Metal Gear Servo (By Savox). 4.8V - 0.26 sec/60° 10.0 kg-cm. 6.0V - 0.23 sec/60° 12.0 kg-cm. With 25T Horn Gear Spline. * Radio System: AMP-30 TX 3-Channel Transmitter. Frequencies: 2.4GHz. - Digital Trimming. - Steering Dual-Rate (ST D/R) Adjustment. - End Point Adjustment (EPA). - Build in Failsafe. Power Supply: 4 - AA Alkaline (Not Included). AMP30 RX 3-Channel Receiver. Frequency: 2.4GHz. Power Supply: DC 4.8 ~ 6.0V. Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H). *** Body: - Official Licensed 2024 M-Sport Puma Rally 1 Edition - Fully Detailed Injection-Molded Body Accessories Body Details Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm) *** Chassis: - 3mm Aluminum Chassis - Front and Rear 3mm Aluminum Shock Towers - Aluminum Arm Brace - Full Precision Ball Bearing Support - Wider Body Mount Positions for Better Support - Front Skid plate with Durable Foam Bumper - Injection-Molded Rear Diffuser - Easy Access Battery Tray - Battery Tray Size 142mm x 48mm *** Suspension: - Aerodynamic Lower Arm Suspension Design - Big Bore Oil Filled Adjustable Coil Over Shocks - 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft - Racing Spring - Adjustable Turnbuckles - Adjustable Wheelbase +/- 6mm *** Gear Ratio: - Spur / Pinion 46/14T 3.29:1 - Ring & Pinion 40/17T 2.35:1 *** Drivetrain: - Full Time 4-Wheels Drive - Center Shaft Drivetrain for more power transferred to the wheels - Metal Transmission Gears - Aluminum Adjustable Motor Mount - Oil Filled Two Differential Drive System - Center Direct Drive - Hight Efficient Transmission System - 6 Gear Bevel Gear Type Differential - Front / Rear Harden Steel Dog Bone and outdrives Wheel: High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm. Tires: High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm. *** Specs: Chassis Length: 18.11 inches (460mm) Chassis Width: 9.06 inches (230mm) Wheelbase: 11.80 inches (300mm) Ground Clearance: 0.98 inches (25mm) Weight: 5.51 lb. 2.5kg

• Powerful Brushless Motor & ESC Performance – Equipped with a CEN Racing 3658 3000KV brushless motor and HobbyWing WP-MAX10-SCT 100A waterproof ESC, this 1/8 scale rally car delivers explosive acceleration, smooth throttle response, and reliable power management with advanced protections including low-voltage cutoff, overheat, and throttle signal loss.
• Precision Steering & Control – Features a high-torque 12Kg Savox metal gear servo with fast response (0.23 sec/60° at 6.0V) and a 25T horn gear spline, paired with the AMP-30 2.4GHz 3-channel transmitter and receiver for precise steering adjustments, dual-rate tuning, EPA, and built-in failsafe for secure handling at all speeds.
• Durable Chassis & Suspension Design – Built on a 3mm aluminum chassis with front/rear aluminum shock towers, arm brace, skid plate, foam bumper, and precision ball bearings. Suspension system includes big bore oil-filled coil-over shocks with 12mm shock bodies and hardened steel shafts for stability on rough terrain.
• Advanced Drivetrain & Gear System – Full-time 4WD drivetrain with center shaft power transfer, aluminum adjustable motor mount, metal transmission gears, oil-filled differentials, and hardened steel dog bones. Delivers efficient power distribution and enhanced durability under demanding racing conditions.
• Authentic Licensed Rally Body & Racing Tires – Officially licensed 2024 M-Sport Ford Puma Rally 1 body with injection-molded details, rear diffuser, and aerodynamic design. Combined with lightweight WRC wheels and high-performance racing rubber compound tires, this car offers both realistic scale appearance and superior grip on-road.